Power Flushing

Ever noticed that your radiators are unusually cold? Over time the efficiency of radiators may become reduced. This is a slow occurrence and not normally noticed by people in the room. However, one does start to notice that the radiators are not normally as warm as they should be, despite the right temperature displayed on the panel.

By power flushing your system, you could increase the efficiency of your heating system by 25-30%. This would in turn mean lower monthly bills for your heating.

So how does power flushing work?

The process entails high velocity with low pressure. Basically, the heating system is cleaned with force at high velocity, but with low operating pressure. The reason for this is to ensure that no damage occurs to the existing system.

Power flushing aims to restore the system circulation and noise emitting from the boiler. Typically caused by sludge and corrosion deposits within the system. By power flushing your system, you thereby remove the deposits or debris that is causing the problems.

Please note, that is vital your system is power flushed before you fit a new boiler to an existing heating system. This will prevent future problems with your heating system in the future. In addition to this, most boiler manufacturers insist power flushing is performed on the systems to keep the boiler within the manufacturer warranty specifications.

The reason for this recommendation is that existing debris or deposits that are currently in the system can become dislodged and find themselves in the boiler itself. Typically, they will end up in the heat exchanger causing an array of problems to the boiler. Sometimes as severe as complete boiler failure.

Modern boilers on the market are of a high efficiency design with compacted structure. This design is intended for minimizing fuel costs and Co2 emissions. However, this does make them more susceptible to problems because of debris in the heating system water.

Let us take a closer look at what you might experience in your home that would require a power flushing of your system.

Symptoms For Power Flushing

• Your heating bills are increasing
• There is constant noise coming from the heating system itself
• Cold spots occurring on the radiators
• Failure of pumps and valves
• Slow cold start up system
• Header tank displays signs of rust or evidence of sludge and grime

These are all symptoms that can lead to eventual catastrophic failure of your heating system. All these can be avoided by power flushing your system and restoring your heating system back to a healthy one. We provide all our customers with written evidence of the state of your heating system before power flushing.

Let 3nergy power flush your system and you can enjoy these benefits afterwards.

• Reduction in heating bills (up to 30%)
• Maximum surface heating areas on all radiators in your home
• Increase in cold start up times
• Life span of heating system increased
• Noise reduced in heating system with better circulation as a result
• Protection against rust
• Our service guarantee with certificate guaranteeing the internal condition of your heating system
• Considerate approach to the cleaning process and take every precaution to protect your house from any spillages

Get in touch with our friendly team to day and let us assess your property and how we can bring your heating bills down with a clean and healthy heating system.